Construction & Earthmoving Forging
Construction equipment works at maximum load in abrasive ground, and every hour of downtime carries an equipment rental cost. Forged wear parts that last two or three times longer than cast alternatives justify themselves on downtime alone.
- Weight Range
- 1 kg – 150 kg
- Materials
- 42CrMo4, EN24, alloy wear grades
- Surface Hardness
- Up to 55 HRC
- Fitment
- OEM interchangeable
- Wear Life
- 2 – 3x cast equivalents
- Applications
- Excavators, loaders, dozers, cranes
Construction & Earthmoving Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Weight Range: 1 kg – 150 kg
- Materials: 42CrMo4, EN24, alloy wear grades
- Surface Hardness: Up to 55 HRC
- Fitment: OEM interchangeable
- Wear Life: 2 – 3x cast equivalents
- Applications: Excavators, loaders, dozers, cranes
Wear Life Drives the Economics
The cost of a bucket tooth is trivial against the cost of stopping a machine to change it. Forged parts with hardened surfaces and tough cores extend change intervals, which is the number a fleet manager actually watches.
- 2–3x wear life over cast parts
- Fewer change-out stoppages
- Hardened surfaces, tough cores
- Interchangeable with OEM fitment
Impact Plus Abrasion
Ground engaging tools face both simultaneously. We hard-face or induction harden working surfaces while keeping the body tough, because a fully hardened tooth shatters and a fully soft one wears away.
Parts We Supply
Bucket teeth and adapters, cutting edges, boom and bucket pins, track link pins and bushes, sprocket segments, idler shafts, hydraulic cylinder rods and lifting hardware.
Topics covered on this page
- construction equipment forging India
- earthmoving forged parts
- excavator parts forging supplier
- construction forging Rajkot
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Can you make parts interchangeable with OEM fitment?
+
Yes, reverse engineered from a sample so fitment with existing adapters and pins is exact.
How much longer do forged wear parts last?
+
Typically two to three times a cast equivalent, depending on ground conditions.
Do you supply hydraulic cylinder rods?
+
Yes, forged, hardened and ground, with hard chrome plating through qualified partners where specified.
What quantities do you supply?
+
From replacement batches of a few hundred up to OEM schedules of several thousand pieces.