Forged Mining & Earthmoving Parts
Mining and earthmoving components face the most punishing combination in industry — massive impact loads plus continuous abrasion from rock and soil. Forged parts with hardened working surfaces and tough cores are the only economical answer.
- Weight Range
- 1 kg – 150 kg
- Materials
- 42CrMo4, EN24, alloy wear grades
- Surface Hardness
- Up to 55 HRC
- Core Condition
- Tough, quenched and tempered
- Products
- Teeth, adapters, pins, rods, links
- Applications
- Excavators, loaders, dozers, mining
Forged Mining & Earthmoving Parts at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Weight Range: 1 kg – 150 kg
- Materials: 42CrMo4, EN24, alloy wear grades
- Surface Hardness: Up to 55 HRC
- Core Condition: Tough, quenched and tempered
- Products: Teeth, adapters, pins, rods, links
- Applications: Excavators, loaders, dozers, mining
Impact Plus Abrasion
A bucket tooth strikes rock thousands of times a shift while sliding through abrasive ground. Full hardness would shatter it; full toughness would wear it away in days. The answer is a hardened working surface over a tough forged core.
- Hardened wear surfaces
- Tough impact-absorbing core
- No porosity to initiate cracks
- Long service between changes
Component Range
Bucket teeth and adapters, cutting edge segments, track link pins and bushes, boom and bucket pins, hydraulic cylinder rods, sprocket segments and idler shafts.
Wear Life Economics
In mining, downtime for a tooth change costs far more than the tooth. Forged parts that last two to three times longer than cast alternatives pay for themselves in avoided change-outs alone, before any material cost comparison.
People also ask
How much longer do forged bucket teeth last?
Typically two to three times a cast equivalent, because forged material has no porosity and combines hardened surfaces with a tough core.
Can you match our existing adapter fitment?
Yes, reverse engineered from a sample so the fit with your existing adapters is exact.
Topics covered on this page
- forged mining parts India
- bucket teeth forging manufacturer
- earthmoving forged components
- excavator parts forging Rajkot
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do forged bucket teeth last longer than cast?
+
Typically two to three times longer, because forged material has no porosity and combines hardened surfaces with a tough core.
Can you make teeth to fit our existing adapters?
+
Yes, via reverse engineering from a sample, matching the fit precisely.
What hardness do you supply?
+
Working surfaces up to 55 HRC with a tough quenched and tempered core, tailored to the ground conditions.
Do you supply hydraulic cylinder rods?
+
Yes, forged, hardened, ground and chrome plated through partner processors where specified.