Marine & Shipbuilding Forging
Marine components combine continuous saltwater exposure with heavy mechanical load and inspection intervals measured in years of drydocking. Few environments are less forgiving.
Forged marine components — propeller shafts, rudder stocks, couplings and deck fittings — face continuous chloride exposure alongside heavy mechanical load, with inspection intervals measured in years. SS 316, duplex and NDT-verified alloy steels are the standard choices.
- Components
- Shafts, rudder stocks, couplings, deck fittings
- Materials
- SS 316, duplex, alloy steel
- NDT
- UT and MPI on critical parts
- Protection
- Marine grade throughout
- Certification
- EN 10204 3.1, TPI available
Marine & Shipbuilding Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- SS 316 and duplex for chloride resistance
- UT and MPI on critical components
- Inspection intervals measured in years
- TPI and classification requirements accommodated
Saltwater Plus Mechanical Load
Chloride attack proceeds continuously while the component carries thrust, torque or mooring load. Grade selection must handle both, which usually means stainless or duplex rather than coated carbon steel that fails wherever the coating is damaged.
- Continuous chloride exposure
- Heavy mechanical loading
- Coatings fail at damage points
- Stainless and duplex preferred
Inspection Intervals in Years
A ship is inspected at drydocking, potentially years apart. Components must have no defect capable of growing critical in that window, which makes NDT and material soundness non-negotiable rather than advisable.
People also ask
Why is duplex used for marine components?
Its ferrite phase resists chloride stress corrosion cracking that attacks austenitic grades, while roughly doubling yield strength so sections can be thinner and lighter.
Can carbon steel be used in marine service?
Only with reliable coating and in accessible locations for maintenance. Coatings fail wherever damaged, and marine corrosion then proceeds rapidly at that point.
What testing accompanies marine forgings?
Ultrasonic and magnetic particle inspection on critical parts, mechanical testing, and EN 10204 3.1 certification with third-party inspection where required.
Topics covered on this page
- marine forging
- propeller shaft
- rudder stock
- duplex stainless
- chloride corrosion
- classification society
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Which material for marine shafts?
+
SS 316 as a minimum for chloride resistance, duplex where stress corrosion cracking is a risk, or alloy steel with proper protection for enclosed applications.
Do you supply classification society approved parts?
+
We manufacture to customer specifications with the testing and documentation classification societies require, with TPI accommodated.
Why is NDT critical for marine components?
+
Inspection intervals can be years apart, so no defect capable of growing to critical size in that window is acceptable.