Forging Exporter to Saudi Arabia
Saudi Arabia's energy sector runs the most specification-heavy procurement we encounter, with sour service requirements that constrain heat treatment as tightly as any application in industry.
We export forged components to Saudi Arabia, where sour service under NACE MR0175 is routine, capping carbon and low alloy steel hardness near 22 HRC with documented verification. Specifications commonly reference API 6A product specification levels, shipping to Dammam or Jeddah in one to two weeks.
- Ports
- Dammam, Jeddah
- Transit
- 1 – 2 weeks
- Sour service
- NACE MR0175 / ISO 15156
- Hardness ceiling
- ≈22 HRC carbon and low alloy
- Specifications
- API 6A PSL referenced
- Inspection
- TPI standard
Forging Exporter to Saudi Arabia at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Ports: Dammam, Jeddah
- Transit: 1 – 2 weeks
- Sour service: NACE MR0175 / ISO 15156
- Hardness ceiling: ≈22 HRC carbon and low alloy
- Specifications: API 6A PSL referenced
- Inspection: TPI standard
Sour Service Governs Everything
Hydrogen sulphide in Saudi fields makes NACE MR0175 / ISO 15156 compliance routine rather than exceptional. Hardness ceilings around 22 HRC for carbon and low alloy steels constrain heat treatment, and compliance is proven by documented hardness testing.
- NACE MR0175 hardness limits
- Documented hardness verification
- Material class per service
- Welds and HAZ included
Documentation Depth
Specifications frequently reference API 6A product specification levels, with escalating NDT, testing and traceability. Documentation packages are extensive, and building them correctly the first time avoids weeks of resubmission.
Logistics
Sea freight from Mundra to Dammam on the Gulf coast or Jeddah on the Red Sea, typically one to two weeks. Corrosion protection is specified for both the sea transit and the extended outdoor storage common at project sites.
Topics covered on this page
- forging exporter to Saudi Arabia
- Aramco forging supplier India
- sour service forgings
- forged components Saudi Arabia
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Can you meet NACE MR0175 requirements?
+
Yes, with heat treatment controlled to the hardness ceiling and documented hardness verification on base metal and welds.
Do you supply to Aramco-referenced specifications?
+
We manufacture to customer specifications that reference them, with the testing and documentation those specifications require.
How long is shipping to Dammam?
+
Typically one to two weeks by sea from Mundra.
What protection do you use for site storage?
+
Heavy corrosion protection suited to extended outdoor storage in hot, humid coastal conditions.