Oil & Gas Forging
In oil and gas, a component failure releases something hot, pressurised and flammable. That is why the sector specifies forged construction, full NDT and documentation that survives audit a decade after delivery.
- Standards
- ANSI B16.5, ASME B16.11, customer specs
- Pressure Classes
- 150# – 1500#, 3000# – 9000#
- Materials
- A105, F11, F22, F304, F316, duplex
- NDT
- UT, MPI, DP with certified reports
- Certification
- EN 10204 3.1
- Inspection
- TPI welcome at works
Oil & Gas Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Standards: ANSI B16.5, ASME B16.11, customer specs
- Pressure Classes: 150# – 1500#, 3000# – 9000#
- Materials: A105, F11, F22, F304, F316, duplex
- NDT: UT, MPI, DP with certified reports
- Certification: EN 10204 3.1
- Inspection: TPI welcome at works
Pressure Integrity Is Non-Negotiable
Interconnected porosity in a cast body forms a leak path. Forged components have none, which is why piping and pressure codes so consistently prefer forged flanges, fittings and valve bodies in critical service.
- No porosity leak paths
- 100% NDT where specified
- EN 10204 3.1 certification
- Third-party inspection accommodated
Materials for the Environment
A105 for general service, F11 and F22 for elevated temperature, F304 and F316 where corrosion governs, duplex where chlorides attack. Sour service requirements are addressed through grade and hardness control.
Parts We Supply
Weld neck and blind flanges, valve bodies and bonnets, socket weld and threaded fittings, wellhead components, drill collars, subs, adapters and pressure housings.
Topics covered on this page
- oil and gas forging India
- petrochemical forged components
- wellhead forging manufacturer
- oilfield forging supplier Gujarat
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you manufacture to API requirements?
+
We manufacture to customer specifications referencing API requirements, with the testing, documentation and traceability those specifications demand.
Is third-party inspection allowed?
+
Yes, TPI agencies witness forging, heat treatment and NDT at our works by appointment.
What NDT do you perform?
+
Ultrasonic, magnetic particle and dye penetrant testing with certified reports referenced to the heat number.
Can you supply sour service components?
+
Sour service requirements are addressed through grade selection and hardness control; please share the specification with your enquiry.